Appendix VIII: Coordinate systems
Introduction
To interpret a coordinate (x, y, z), it is required that you know relative to which origin the coordinates are expressed, you have to know the interpretation of the three axes, and you have to know the units in which the numbers are expressed. This information is sometimes called the coordinate system.
These letters help describe the coordinate system definition:
- A/P means anterior/posterior
- L/R means left/right
- S/I means superior/inferior
For example: RAS
means that the first dimension (X) points towards the right
hand side of the head, the second dimension (Y) points towards the Anterior
aspect of the head, and the third dimension (Z) points towards the top of the
head.
Besides coordinate systems, defined by their origin and direction of the axes, BIDS defines "spaces" as an artificial frame of reference, created to describe different anatomies in a unifying manner (see e.g., https://doi.org/10.1016/j.neuroimage.2012.01.024). The "space" and all coordinates expressed in this space are by design a transformation of the real world geometry, and nearly always different from the individual subject space that it stems from. An example is the Talairach-Tournoux space, which is constructed by piecewise linear scaling of an individual's brain to that of the Talairach-Tournoux 1988 atlas. In the Talairach-Tournoux space, the origin of the coordinate system is at the AC and units are expressed in mm.
The coordinate systems below all relate to neuroscience and therefore to the head or brain coordinates. Please be aware that all data acquisition starts with "device coordinates" (scanner), which does not have to be identical to the initial "file format coordinates" (DICOM), which are again different from the "head" coordinates (e.g., NIFTI). Not only do device coordinate vary between hardware manufacturers, but also the head coordinates differ, mostly due to different conventions used in specific software packages developed by different (commercial or academic) groups.
Coordinate Systems applicable to MEG, EEG, and iEEG
Generally, across the MEG, EEG, and iEEG modalities, the first two pieces of
information (origin, orientation) are specified in XXXCoordinateSystem
, and
the units are specified in XXXCoordinateSystemUnits
.
Allowed values for the XXXCoordinateSystem
field come from a list of
restricted keywords, as listed in the sections below. If no value from the list
of restricted keywords fits, there is always the option to specify the value as
follows:
Other
: Use this for other coordinate systems and specify further details in theXXXCoordinateSystemDescription
field
MEG Specific Coordinate Systems
Restricted keywords for the XXXCoordinateSystem
field in the
coordinatesystem.json
file for MEG datasets:
CTF
: ALS orientation and the origin between the earsElektaNeuromag
: RAS orientation and the origin between the ears4DBti
: ALS orientation and the origin between the earsKitYokogawa
: ALS orientation and the origin between the earsChietiItab
: RAS orientation and the origin between the ears
Note that the short descriptions above do not capture all details, There are detailed extensive descriptions of these EEG coordinate systems on the FieldTrip toolbox web page
EEG Specific Coordinate Systems
Restricted keywords for the XXXCoordinateSystem
field in the
coordsystem.json
file for EEG datasets:
Captrak
: RAS orientation and the origin between the ears
Note that the short descriptions above do not capture all details, There are detailed extensive descriptions of these EEG coordinate systems on the FieldTrip toolbox web page.
iEEG Specific Coordinate Systems
Restricted keywords for the XXXCoordinateSystem
field in the
coordsystem.json
file for iEEG datasets:
-
Pixels
: If electrodes are localized in 2D space (only x and y are specified and z is n/a), then the positions in this file must correspond to the locations expressed in pixels on the photo/drawing/rendering of the electrodes on the brain. In this case, coordinates must be (row,column) pairs, with (0,0) corresponding to the upper left pixel and (N,0) corresponding to the lower left pixel. -
ACPC
: The origin of the coordinate system is at the Anterior Commissure and the negative y-axis is passing through the Posterior Commissure. The positive z-axis is passing through a mid-hemispheric point in the superior direction. The anatomical landmarks are determined in the individual's anatomical scan and no scaling or deformations have been applied to the individual's anatomical scan. For more information, see the ACPC site on the FieldTrip toolbox wiki.
Image-based Coordinate Systems
The transformation of the real world geometry to an artificial frame of
reference is described in XXXCoordinateSystem
.
Unless otherwise specified below, the origin is at the AC and the orientation of
the axes is RAS.
Unless specified explicitly in the sidecar file in the XXXCoordinateSystemUnits
field,
the units are assumed to be mm.
Standard template identifiers
Coordinate System | Description |
---|---|
ICBM452AirSpace | Reference space defined by the "average of 452 T1-weighted MRIs of normal young adult brains" with "linear transforms of the subjects into the atlas space using a 12-parameter affine transformation" https://www.loni.usc.edu/research/atlases |
ICBM452Warp5Space | Reference space defined by the "average of 452 T1-weighted MRIs of normal young adult brains" "based on a 5th order polynomial transformation into the atlas space" https://www.loni.usc.edu/research/atlases |
IXI549Space | Reference space defined by the average of the "549 (...) subjects from the IXI dataset" linearly transformed to ICBM MNI 452.Used by SPM12. http://www.brain-development.org/ |
fsaverage[3|4|5|6|sym] | DISCOURAGED, please use fsaverage without modifiers. Images were sampled to the FreeSurfer surface reconstructed from the subject’s T1w image, and registered to an fsaverage template |
fsaverage | The fsaverage is a dual template providing both volumetric and surface coordinates references. The volumetric template corresponds to a FreeSurfer variant of MNI305 space. The fsaverage atlas also defines a surface reference system (formerly described as fsaverage[3|4|5|6|sym]). |
fsaverageSym | The fsaverage is a dual template providing both volumetric and surface coordinates references. The volumetric template corresponds to a FreeSurfer variant of MNI305 space. The fsaverageSym atlas also defines a symmetric surface reference system (formerly described as fsaveragesym ). |
fsLR | The fsLR is a dual template providing both volumetric and surface coordinates references. The volumetric template corresponds to MNI152NLin6Asym . Surface templates are given at several sampling densities: 164k (used by HCP pipelines for 3T and 7T anatomical analysis), 59k (used by HCP pipelines for 7T MRI bold and DWI analysis), 32k (used by HCP pipelines for 3T MRI bold and DWI analysis), or 4k (used by HCP pipelines for MEG analysis) fsaverage_LR surface reconstructed from the T1w image. |
MNIColin27 | Average of 27 T1 scans of a single subject http://www.bic.mni.mcgill.ca/ServicesAtlases/Colin27Highres |
MNI152Lin | Also known as ICBM (version with linear coregistration) http://www.bic.mni.mcgill.ca/ServicesAtlases/ICBM152Lin |
MNI152NLin2009[a-c][Sym|Asym] | Also known as ICBM (non-linear coregistration with 40 iterations, released in 2009). It comes in either three different flavours each in symmetric or asymmetric version. http://www.bic.mni.mcgill.ca/ServicesAtlases/ICBM152NLin2009 |
MNI152NLin6Sym | Also known as symmetric ICBM 6th generation (non-linear coregistration). Used by SPM99 - SPM8. http://www.bic.mni.mcgill.ca/ServicesAtlases/ICBM152NLin6 |
MNI152NLin6ASym | A variation of MNI152NLin6Sym built by A. Janke that is released as the MNI template of FSL. Volumetric templates included with HCP-Pipelines correspond to this template too. See 10.1016/j.neuroimage.2012.01.024. |
MNI305 | Also known as avg305. |
NIHPD | Pediatric templates generated from the NIHPD sample. Available for different age groups (4.5–18.5 y.o., 4.5–8.5 y.o., 7–11 y.o., 7.5–13.5 y.o., 10–14 y.o., 13–18.5 y.o. This template also comes in either -symmetric or -asymmetric flavor. http://www.bic.mni.mcgill.ca/ServicesAtlases/NIHPD-obj1 |
OASIS30AntsOASISAnts | https://figshare.com/articles/ANTs_ANTsR_Brain_Templates/915436 |
OASIS30Atropos | https://mindboggle.info/data.html |
Talairach | Piecewise linear scaling of the brain is implemented as described in TT88. http://www.talairach.org/ |
UNCInfant | Infant Brain Atlases from Neonates to 1- and 2-year-olds. https://www.nitrc.org/projects/pediatricatlas |
UNCInfant[0|1|2]V[21|22|23] | DISCOURAGED, please use UNCInfant without modifiers. Infant Brain Atlases from Neonates to 1- and 2-year-olds. https://www.nitrc.org/projects/pediatricatlas |
The following template identifiers are retained for backwards compatibility of BIDS implementations. Their use is NOT RECOMMENDED for new BIDS datasets and tooling, but their presence MUST NOT produce a validation error.
Coordinate System | Recommended identifier |
---|---|
fsaverage[3|4|5|6|sym] | fsaverage[|Sym] |
UNCInfant[0|1|2]V[21|22|23] | UNCInfant |
Nonstandard coordinate system identifiers
The following template identifiers are RECOMMENDED for individual- and study-specific reference
spaces.
In order for these spaces to be interpretable, SpatialReference
metadata MUST be provided, as
described in Common file level metadata fields.
In the case of multiple study templates, additional names may need to be defined.
Coordinate System | Description |
---|---|
individual | Participant specific anatomical space (for example derived from T1w and/or T2w images). This coordinate system requires specifying an additional, participant-specific file to be fully defined. In context of surfaces this space has been refered to as fsnative . |
study | Custom space defined using a group/study-specific template. This coordinate system requires specifying an additional file to be fully defined. |
Non-template coordinate system identifiers
The scanner
coordinate system is implicit and assumed by default if the derivative filename does not define any space-<label>
.
Please note that space-scanner
SHOULD NOT be used, it is mentioned in this specification to make its existence explicit.
Coordinate System | Description |
---|---|
scanner | The intrinsic coordinate system of the original image (the first entry of RawSources ) after reconstruction and conversion to NIfTI or equivalent for the case of surfaces and dual volume/surface files. |