Skip to content

Modality agnostic files

Dataset description

Templates:

  • dataset_description.json
  • README
  • CHANGES
  • LICENSE

dataset_description.json

The file dataset_description.json is a JSON file describing the dataset. Every dataset MUST include this file with the following fields:

Key name Requirement level Data type Description
Name REQUIRED string Name of the dataset.
BIDSVersion REQUIRED string The version of the BIDS standard that was used.
HEDVersion RECOMMENDED string If HED tags are used: The version of the HED schema used to validate HED tags for study.
DatasetType RECOMMENDED string The interpretation of the dataset. MUST be one of "raw" or "derivative". For backwards compatibility, the default value is "raw".
License RECOMMENDED string The license for the dataset. The use of license name abbreviations is RECOMMENDED for specifying a license (see Appendix II). The corresponding full license text MAY be specified in an additional LICENSE file.
Authors OPTIONAL array of strings List of individuals who contributed to the creation/curation of the dataset.
Acknowledgements OPTIONAL string Text acknowledging contributions of individuals or institutions beyond those listed in Authors or Funding.
HowToAcknowledge OPTIONAL string Text containing instructions on how researchers using this dataset should acknowledge the original authors. This field can also be used to define a publication that should be cited in publications that use the dataset.
Funding OPTIONAL array of strings List of sources of funding (grant numbers).
EthicsApprovals OPTIONAL array of strings List of ethics committee approvals of the research protocols and/or protocol identifiers.
ReferencesAndLinks OPTIONAL array of strings List of references to publications that contain information on the dataset. A reference may be textual or a URI.
DatasetDOI OPTIONAL string The Digital Object Identifier of the dataset (not the corresponding paper). DOIs SHOULD be expressed as a valid URI; bare DOIs such as 10.0.2.3/dfjj.10 are DEPRECATED.

Example:

{
  "Name": "The mother of all experiments",
  "BIDSVersion": "1.4.0",
  "DatasetType": "raw",
  "License": "CC0",
  "Authors": [
    "Paul Broca",
    "Carl Wernicke"
  ],
  "Acknowledgements": "Special thanks to Korbinian Brodmann for help in formatting this dataset in BIDS. We thank Alan Lloyd Hodgkin and Andrew Huxley for helpful comments and discussions about the experiment and manuscript; Hermann Ludwig Helmholtz for administrative support; and Claudius Galenus for providing data for the medial-to-lateral index analysis.",
  "HowToAcknowledge": "Please cite this paper: https://www.ncbi.nlm.nih.gov/pubmed/001012092119281",
  "Funding": [
    "National Institute of Neuroscience Grant F378236MFH1",
    "National Institute of Neuroscience Grant 5RMZ0023106"
  ],
  "EthicsApprovals": [
    "Army Human Research Protections Office (Protocol ARL-20098-10051, ARL 12-040, and ARL 12-041)"
  ],
  "ReferencesAndLinks": [
    "https://www.ncbi.nlm.nih.gov/pubmed/001012092119281",
    "Alzheimer A., & Kraepelin, E. (2015). Neural correlates of presenile dementia in humans. Journal of Neuroscientific Data, 2, 234001. doi:1920.8/jndata.2015.7"
  ],
  "DatasetDOI": "doi:10.0.2.3/dfjj.10",
  "HEDVersion": "7.1.1"
}

Derived dataset and pipeline description

As for any BIDS dataset, a dataset_description.json file MUST be found at the top level of the a derived dataset: <dataset>/derivatives/<pipeline_name>/dataset_description.json

In addition to the keys for raw BIDS datasets, derived BIDS datasets include the following REQUIRED and RECOMMENDED dataset_description.json keys:

Key name Requirement level Data type Description
GeneratedBy REQUIRED array of objects Used to specify provenance of the derived dataset. See table below for contents of each object.
SourceDatasets RECOMMENDED array of objects Used to specify the locations and relevant attributes of all source datasets. Valid keys in each object include URL, DOI (see URI), and Version with string values.

Each object in the GeneratedBy list includes the following REQUIRED, RECOMMENDED and OPTIONAL keys:

Key name Requirement level Data type Description
Name REQUIRED string Name of the pipeline or process that generated the outputs. Use "Manual" to indicate the derivatives were generated by hand, or adjusted manually after an initial run of an automated pipeline.
Version RECOMMENDED string Version of the pipeline.
Description OPTIONAL string Plain-text description of the pipeline or process that generated the outputs. RECOMMENDED if Name is "Manual".
CodeURL OPTIONAL string URL where the code used to generate the derivatives may be found.
Container OPTIONAL object Used to specify the location and relevant attributes of software container image used to produce the derivative. Valid keys in this object include Type, Tag and URI with string values.

Example:

{
  "Name": "FMRIPREP Outputs",
  "BIDSVersion": "1.4.0",
  "DatasetType": "derivative",
  "GeneratedBy": [
    {
      "Name": "fmriprep",
      "Version": "1.4.1",
      "Container": {
        "Type": "docker",
        "Tag": "poldracklab/fmriprep:1.4.1"
        }
    },
    {
      "Name": "Manual",
      "Description": "Re-added RepetitionTime metadata to bold.json files"
    }
  ],
  "SourceDatasets": [
    {
      "DOI": "doi:10.18112/openneuro.ds000114.v1.0.1",
      "URL": "https://openneuro.org/datasets/ds000114/versions/1.0.1",
      "Version": "1.0.1"
    }
  ]
}

If a derived dataset is stored as a subfolder of the raw dataset, then the Name field of the first GeneratedBy object MUST be a substring of the derived dataset folder name. That is, in a directory <dataset>/derivatives/<pipeline>[-<variant>]/, the first GeneratedBy object should have a Name of <pipeline>.

README

In addition a free form text file (README) describing the dataset in more details SHOULD be provided. The README file MUST be either in ASCII or UTF-8 encoding.

CHANGES

Version history of the dataset (describing changes, updates and corrections) MAY be provided in the form of a CHANGES text file. This file MUST follow the CPAN Changelog convention. The CHANGES file MUST be either in ASCII or UTF-8 encoding.

Example:

1.0.1 2015-08-27
  - Fixed slice timing information.

1.0.0 2015-08-17
  - Initial release.

LICENSE

A LICENSE file MAY be provided in addition to the short specification of the used license in the dataset_description.json "License" field. The "License" field and LICENSE file MUST correspond. The LICENSE file MUST be either in ASCII or UTF-8 encoding.

Participants file

Template:

participants.tsv
participants.json

The purpose of this RECOMMENDED file is to describe properties of participants such as age, sex, handedness. In case of single-session studies, this file has one compulsory column participant_id that consists of sub-<label>, followed by a list of optional columns describing participants. Each participant MUST be described by one and only one row.

Commonly used optional columns in participant.tsv files are age, sex, and handedness. We RECOMMEND to make use of these columns, and in case that you do use them, we RECOMMEND to use the following values for them:

  • age: numeric value in years (float or integer value)

  • sex: string value indicating phenotypical sex, one of "male", "female", "other"

    • for "male", use one of these values: male, m, M, MALE, Male

    • for "female", use one of these values: female, f, F, FEMALE, Female

    • for "other", use one of these values: other, o, O, OTHER, Other

  • handedness: string value indicating one of "left", "right", "ambidextrous"

    • for "left", use one of these values: left, l, L, LEFT, Left

    • for "right", use one of these values: right, r, R, RIGHT, Right

    • for "ambidextrous", use one of these values: ambidextrous, a, A, AMBIDEXTROUS, Ambidextrous

Throughout BIDS you can indicate missing values with n/a (for "not available").

participants.tsv example:

participant_id age sex handedness group
sub-01 34 M right read
sub-02 12 F right write
sub-03 33 F n/a read

It is RECOMMENDED to accompany each participants.tsv file with a sidecar participants.json file to describe the TSV column names and properties of their values (see also the section on tabular files). Such sidecar files are needed to interpret the data, especially so when optional columns are defined beyond age, sex, and handedness, such as group in this example, or when a different age unit is needed (for example, gestational weeks). If no units is provided for age, it will be assumed to be in years relative to date of birth.

participants.json example:

{
    "age": {
        "Description": "age of the participant",
        "Units": "years"
    },
    "sex": {
        "Description": "sex of the participant as reported by the participant",
        "Levels": {
            "M": "male",
            "F": "female"
        }
    },
    "handedness": {
        "Description": "handedness of the participant as reported by the participant",
        "Levels": {
            "left": "left",
            "right": "right"
        }
    },
    "group": {
        "Description": "experimental group the participant belonged to",
        "Levels": {
            "read": "participants who read an inspirational text before the experiment",
            "write": "participants who wrote an inspirational text before the experiment"
        }
    }
}

Phenotypic and assessment data

Template:

phenotype/<measurement_tool_name>.tsv
phenotype/<measurement_tool_name>.json

Optional: Yes

If the dataset includes multiple sets of participant level measurements (for example responses from multiple questionnaires) they can be split into individual files separate from participants.tsv.

Each of the measurement files MUST be kept in a /phenotype directory placed at the root of the BIDS dataset and MUST end with the .tsv extension. File names SHOULD be chosen to reflect the contents of the file. For example, the "Adult ADHD Clinical Diagnostic Scale" could be saved in a file called /phenotype/acds_adult.tsv.

The files can include an arbitrary set of columns, but one of them MUST be participant_id and the entries of that column MUST correspond to the subjects in the BIDS dataset and participants.tsv file.

As with all other tabular data, the additional phenotypic information files MAY be accompanied by a JSON file describing the columns in detail (see Tabular files). In addition to the column description, a section describing the measurement tool (as a whole) MAY be added under the name MeasurementToolMetadata. This section consists of two keys:

  • Description: A free text description of the measurement tool
  • TermURL: A URL to an entity in an ontology corresponding to this tool.

As an example, consider the contents of a file called phenotype/acds_adult.json:

{
  "MeasurementToolMetadata": {
    "Description": "Adult ADHD Clinical Diagnostic Scale V1.2",
    "TermURL": "http://www.cognitiveatlas.org/task/id/trm_5586ff878155d"
  },
  "adhd_b": {
    "Description": "B. CHILDHOOD ONSET OF ADHD (PRIOR TO AGE 7)",
    "Levels": {
      "1": "YES",
      "2": "NO"
    }
  },
  "adhd_c_dx": {
    "Description": "As child met A, B, C, D, E and F diagnostic criteria",
    "Levels": {
      "1": "YES",
      "2": "NO"
    }
  }
}

Please note that in this example MeasurementToolMetadata includes information about the questionnaire and adhd_b and adhd_c_dx correspond to individual columns.

In addition to the keys available to describe columns in all tabular files (LongName, Description, Levels, Units, and TermURL) the participants.json file as well as phenotypic files can also include column descriptions with a Derivative field that, when set to true, indicates that values in the corresponding column is a transformation of values from other columns (for example a summary score based on a subset of items in a questionnaire).

Scans file

Template:

sub-<label>/[ses-<label>/]
    sub-<label>[_ses-<label>]_scans.tsv
    sub-<label>[_ses-<label>]_scans.json

Optional: Yes

The purpose of this file is to describe timing and other properties of each imaging acquisition sequence (each run file) within one session. Each neural recording file should be described by at most one row. Relative paths to files should be used under a compulsory filename header. If acquisition time is included it should be under acq_time header. Acquisition time refers to when the first data point in each run was acquired. Datetime should be expressed as described in Units. For anonymization purposes all dates within one subject should be shifted by a randomly chosen (but consistent across all recordings) number of days. This way relative timing would be preserved, but chances of identifying a person based on the date and time of their scan would be decreased. Dates that are shifted for anonymization purposes SHOULD be set to the year 1925 or earlier to clearly distinguish them from unmodified data. Shifting dates is RECOMMENDED, but not required.

Additional fields can include external behavioral measures relevant to the scan. For example vigilance questionnaire score administered after a resting state scan. All such included additional fields SHOULD be documented in an accompanying _scans.json file that describes these fields in detail (see Tabular files).

Example _scans.tsv:

filename    acq_time
func/sub-control01_task-nback_bold.nii.gz   1877-06-15T13:45:30
func/sub-control01_task-motor_bold.nii.gz   1877-06-15T13:55:33

Code

Template: code/*

Source code of scripts that were used to prepare the dataset MAY be stored here. Examples include anonymization or defacing of the data, or the conversion from the format of the source data to the BIDS format (see source vs. raw vs. derived data). Extra care should be taken to avoid including original IDs or any identifiable information with the source code. There are no limitations or recommendations on the language and/or code organization of these scripts at the moment.